FUJITSU ServerView Resource Orchestrator Cloud Edition J2X1-7611-03ENZ0 - Manual (Page 178)

- Number of NICs
Check the number of NICs mounted on a compatible server and L-Server.
A server is considered as a server satisfying the conditions, in the following cases:
- The number of NICs mounted on the compatible server is the same as the number in the L-Server definition
- The number is more than the number in the L-Server definition
Selection of Suitable Spare Servers
When the [Use a low spec server] checkbox is not selected, a spare server is automatically set.
Based on the following conditions, an L-Server definition is compared to physical L-Servers existing in the specified resource pool as a
spare server:
- When specifying the model name on creation of a physical L-Server
- If the "model name" is the same or compatible
- Number of NICs
- If CPUs and memories are specified when specifying a physical L-Server
- CPU core count
- CPU clock speed
- Memory capacity
- Number of NICs
Configurations are not checked.
A server that satisfies or exceeds all conditions and has the nearest specifications to the L-Server definition is selected.
When the [Use a low spec server] checkbox is selected, physical servers with models matching that in the L-Server definition are selected
as spare servers.
For details, refer to "B.9 Methods for Selecting Physical Servers Automatically" in the "Setup Guide CE".
Modification of Checks on Spare Server Models and Configurations
The switchover policy and the definition of server model compatibility can be modified.
Although the definition file is deployed when installing managers, a server model with a matching L-Server definition and physical server
model is selected as a spare server in the following cases:
- When there is no definition file
- When there is an error in definitions
When the [Use a low spec server] checkbox is selected, physical servers with models matching that in the L-Server definition are selected
as spare servers.
The definition file for checks on spare server models and configurations is stored in the following location.
Location of the Definition File
[Windows Manager]
Installation_folder \SVROR\Manager\etc\customize_data
[Linux Manager]
/etc/opt/FJSVrcvmr/customize_data
Definition File Name
spare_server_config.rcxprop
- 164 -