FUJITSU ServerView Resource Orchestrator Cloud Edition J2X1-7611-03ENZ0 - Manual (Page 84)

6. When the following applies to the additional network device, create and register rulesets.
- When adding an L2 switch of a model for which sample scripts are not prepared, or an L2 switch of a model that has not been
used in the system until now.
In this case, it is necessary to create a directory to allocate rulesets to.
- When using a model for which sample scripts are not prepared, or even when using a model which has been used in the system
until now, by configuring definitions using the different rules (scripts)
- Even when using a model for which sample scripts are prepared, and when using a model with definitions configured using
different rules (scripts)
Note
Details of sample scripts may be reviewed and modified. When using rulesets modified from prepared sample scripts, the modified
details will be cleared by replacing the modified scripts with the sample scripts, when updating sample scripts.
In order to prevent this type of problem, when creating scripts by referring to sample scripts, create the new rulesets after copying
the rulesets of the sample script, and perform necessary modifications.
7. Change all resources using the additional network devices.
It is necessary to add the information about uplink ports of the added chassis, when adding a blade server.
Use the rcxadm network modify command to modify a network resource.
8. Register the added server as a resource in the necessary resource pool.
See
- For details on the initial configurations of network devices, refer to "9.2.3 Settings for Managed Network Devices" in the "Design
Guide CE".
- For details on how to create network configuration information (XML definition), refer to "15.6 Network Configuration Information"
in the "Reference Guide (Command/XML) CE".
- For details on the rcxadm netdevice command, refer to "3.8 rcxadm netdevice" in the "Reference Guide (Command/XML) CE".
- For details on ruleset creation and the registration destinations, refer to "F.3 Creating a Folder for Registering Rulesets" in the "Setup
Guide CE".
- For details on the rcxadm network command, refer to "3.9 rcxadm network" in the "Reference Guide (Command/XML) CE".
- For details on how to register a resource in a resource pool, refer to "Chapter 19 Resource Operations" in the "User's Guide for
Infrastructure Administrators (Resource Management) CE".
9.5.3.2 Adding Firewalls, Server Load Balancers, and L2 Switches for Additional
Tenants
This section explains the procedure for addition, assuming a case where it is necessary to add a network device or a server in order to add
a tenant.
The explanation is mainly about operations related to firewalls, server load balancers, and L2 switches.
When there is no description, the following operations are performed by an infrastructure administrator.
- 70 -