FUJITSU ServerView Resource Orchestrator Cloud Edition J2X1-7611-03ENZ0 - Manual (Page 34)

- L-Server template name where automatic server release settings are enabled
VMware_Small_Repurpose
7.2.10 Definition VM Specific Information Definition File
If an overcommit value has not been set for the L-Server template selected in "type" on the Reconfiguration page of the L-Platform
subscription window, then the values set in VM specific information definition file will not be used, even if the file is used. Rather, the
following values are applied:
[VMware]
- CPU Reserved: 0.1GHz
- CPU Shares: 1000
- Memory Reserved: Memory Size
- Memory Shares: Memory Size * 10240
[Hyper-V]
- CPU Reserved: 0.1GHz
- CPU Weight: 100
- Memory RAM: Memory Size
- Memory Weight: 5000
With L-Server templates used in L-Platforms, set the values for overcommit in the L-Server templates rather than in a definition VM
specific information definition file.
7.2.11 Changing Server Specifications on a VM Host
In L-Platform subscription and L-Platform configuration changes, the upper limits of the server's specifications are determined by the
maximum number of CPUs, maximum CPU frequency, and the maximum memory capacity values specified in the L-Platform template's
image information.
After deploying an L-Platform, and if the server's CPUs, CPU frequency, and memory capacity are to be changed from the VM host, make
sure you specify values that do not exceed the maximum values specified in the image information of the L-Platform template.
If the values specified for the CPUs, CPU frequency, and memory capacity exceed the maximum values specified in the image information
of the L-Platform template, those values will be changed back to match the maximum values when the configuration is changed.
Point
Do not change the server's CPUs, CPU frequency, and memory capacity from the VM host if possible.
- 20 -