FUJITSU ServerView Resource Orchestrator Cloud Edition J2X1-7611-03ENZ0 User Manual
Page 58
-
For SPARC M10
The infrastructure administrator places the managed servers into maintenance mode.
Also place the managed servers into maintenance mode when reducing the capacity of the CPU on the system using the
Capacity on Demand(CoD) function of SPARC M10.
For details on maintenance mode, refer to "Appendix C Maintenance Mode" in the "User's Guide for Infrastructure
Administrators (Resource Management) CE".
-
When using a server for which spare servers are not configured
When using a server for which spare servers are not configured, the infrastructure administrator places the managed server
into maintenance mode.
For details on maintenance mode, refer to "Appendix C Maintenance Mode" in the "User's Guide for Infrastructure
Administrators (Resource Management) CE".
-
When the maintenance target is a network device
When the maintenance target is a network device, the infrastructure administrator places the relevant network device into
maintenance mode, and excludes it from being the target of monitoring and auto-configuration.
For details, refer to "Chapter 22.1 Switchover of Maintenance Mode" in the "User's Guide for Infrastructure Administrators
(Resource Management) CE".
4.
Implement Regular Maintenance
The infrastructure administrator performs the maintenance operations such as regular maintenance or patch application.
For details on the maintenance of managed servers, refer to the following sections:
-
"
-
"
9.3 Maintenance for Servers Other Than Blade Servers
"
-
"
9.4 For Servers not Using Server Management Software
"
For details on the maintenance of network devices, refer to the following section:
-
"
9.5 Network Device Maintenance
5.
Release Maintenance Status
The infrastructure administrator releases the resource from maintenance mode.
-
When the maintenance target is a managed server
-
When using physical L-Servers
The infrastructure administrator releases the physical L-Servers from maintenance mode.
For details on maintenance mode, refer to "Appendix C Maintenance Mode" in the "User's Guide for Infrastructure
Administrators (Resource Management) CE".
-
For SPARC M10
When replacing or adding server components, if the resources are targets of monitoring, ensure that the information has
been updated from the ROR console and then release them from maintenance mode.
When changing the CPU or memory, check the following:
- The [Resource List] tab of the orchestration tree
[CPU Capacity (Unused/Total)] and [Memory Capacity (Unused/Total)] of the [VM Host List]
- The [Resource Details] tab of the orchestration tree
[CPU Capacity] and [Memory Capacity] under the [VM Host List] and [Capacity]
- The [Available Pool] tab of the orchestration tree
[VM Host List], [CPU Capacity (Unused/Total)], and [Memory Capacity (Unused/Total)]
The infrastructure administrator releases the managed servers from maintenance mode.
- 44 -