FUJITSU ServerView Resource Orchestrator Cloud Edition J2X1-7611-03ENZ0 - Manual (Page 59)

For details on maintenance mode, refer to "Appendix C Maintenance Mode" in the "User's Guide for Infrastructure
Administrators (Resource Management) CE".
- When using a server for which spare servers are not configured
When using a server for which spare servers are not configured, the infrastructure administrator releases the managed server
from maintenance mode.
For details on maintenance mode, refer to "Appendix C Maintenance Mode" in the "User's Guide for Infrastructure
Administrators (Resource Management) CE".
- When the maintenance target is a network device
The infrastructure administrator adds the network device as the target of monitoring or auto-configuration by releasing it from
maintenance mode.
For details, refer to "Chapter 22.1 Switchover of Maintenance Mode" in the "User's Guide for Infrastructure Administrators
(Resource Management) CE".
6. Notify Users of Maintenance Operation Completion
The infrastructure administrator notifies tenant administrators and tenant users that manage or use L-Platforms running on the
hardware which was the target of maintenance that maintenance operations have been completed.
As one method of notification, Resource Orchestrator provides the function which shows the information by displaying
"Information" on the ROR console for tenant administrators or tenant users.
For details, refer to "3.2 Editing the Home Messages" in the "User's Guide for Infrastructure Administrators CE".
Flow of Corrective Actions when Hardware Fails
The flow of corrective actions when hardware fails is as below.
Figure 9.2 Flow of Corrective Actions when Hardware on which an L-Platform Operates Fails
1. Error Detection
Errors are detected at the following timing:
- When operation errors are reported to the tenant user by the user of the application running on the L-Platform
- When hardware errors are detected by the infrastructure administrator or the infrastructure monitor
- When the status of L-Platform resources used on the ROR console change to something other than "normal"
- 45 -