FUJITSU ServerView Resource Orchestrator Cloud Edition J2X1-7611-03ENZ0 - Manual (Page 80)

automatically.
For details, please refer to the manual of the "Cisco ASA 5500 series".
- For restoration of network device files, please refer to " 10.2.3 Restoration of Network Devices ".
For the maintenance procedures for network devices, refer to the manual of the network device.
7. Back up the current network device files from the network devices with operational status.
If the content of the backed up device configuration file is up to date, this step is not required.
If the content is not up to date, take a backup of the network device configuration file using the rcxadm netdevice cfbackup command.
The date and time of backup can be checked using the rcxadm netdevice cflist command.
8. Check that there are no differences in the definitions that become a problem in the redundancy configurations that use the network
device files used in step 4 and the network device configuration file in the network device file backed up in step 7.
Export each network device configuration file using the rcxadm netdevice cfexport command and check the difference.
When there is difference that becomes a problem, please resolve difference following the maintenance procedure for network
devices.
For the maintenance procedures for network devices, refer to the manual of the network device.
9. Release the "maintenance mode" of network devices, when problems with network devices after replacement have been solved.
10. Notification that maintenance operations are complete.
See
- When checking the configuration of a network device, you may not be able to confirm it from the network device environment file.
Check in the manual of the network device if it is possible to check the configuration of the network device from the network device
environment file, in advance.
- For details on how to configure and release the maintenance mode, refer to "22.1 Switchover of Maintenance Mode" in the "User's
Guide for Infrastructure Administrators (Resource Management) CE".
- For details on the rcxadm netdevice command, refer to "3.8 rcxadm netdevice" in the "Reference Guide (Command/XML) CE".
Note
- Replacement using the same model is a prerequisite when replacing network devices.
- Confirm the following items, using the manuals of network devices, in advance.
- The replacement procedure when using redundancy configurations
- The operations for network devices (status check and switchover)
- Environmental differences which become problems when configuring redundancy configurations
When the network device file management function is not used, confirm the following item, in the manuals of network devices, in
advance.
- The operations for network devices (backup methods and restore methods)
- When using the network devices of redundancy configurations, replace network devices in the following order.
1. Replace network devices with standby status
2. Set the status of the network device before replacement to standby, and replace the device
When replacing multiple network devices of redundancy configurations simultaneously, perform replacement operations in units of
the same redundancy configurations.
- 66 -