Fostex MR-8MKII - Manual (Page 100)

100
MR-8mkII Owner’s Manual (Track data editing)
<Note>: If you want to cancel the move opera-
tion, move the cursor to "[CANCEL]" on the
screen, and press the [MENU/ENTER] key.
9) Press the [MENU/ENTER] key.
The display now returns to the track edit menu
screen, where “Move Track >” is highlighted.
10) Press the [STOP] key to exit the menu mode.
<Note>: If a destination track has recorded
data, moving data overwrites the previous
data.
<Note>: If you are not satisfied with the re-
sult, press the [UNDO/REDO] key to undo
the operation (see page 95).
<Note>: You cannot select the same track(s)
for the move source and destination.
You can select the same number of tracks as
the move source track(s). For example, if you
select a mono track for the move source, you
can only select a mono for the move destina-
tion.
8) Rotate the JOG dial to move the cursor to
"[ENTER]" on the screen, and press the
[MENU/ENTER] key.
The display shows "Please Wait", immediately
followed by "Completed" when the MR-8mkII
completes the move operation.
7) Rotate the JOG dial to select destination track(s),
and press the [MENU/ENTER] key.
“Dest. Track = *” is now highlighted on the
screen.
flashing