Fostex MR-8MKII - Manual (Page 54)

MR-8mkII Owner’s Manual (Punch in/out)
54
1) Press the [REC SELECT] key for the track you
are going to make punch in/out recording.
The track is record-armed.
2) Locate the recorder to the point before the punch-
in point and press the [PLAY] key to start
playback.
It may be a good idea to play the instrument
along with the playback sound, so that you can
get the tempo and feel.
3) When the recorder reaches at the point you want
to punch in, press the [RECORD] key while holding
down the [PLAY] key (see <Important note> below>).
The armed track is punched in (i.e. starts
recording).
<Note>: The punch in/out operation by yourself using the keys on the top panel sometimes
prevents you from concentrating on playing. In such a case, ask someone to operate the MR-
8mkII, or use either of the other two punch in/out methods described later.
You can make punch in/out manually by using the [RECORD] and [PLAY] keys on the MR-8mkII
top panel.
4) When the recorder reaches at the point you want
to punch out, press only the [PLAY] key.
The recorder status switches from recording
to playback.
5) Press the [STOP] key to stop the recorder.
6) Rewind the recorder and play back the part you
performed the punch in/out recording to check
the result.
If you are not satisfied with the result, use the
undo function to cancel the punch in/out
recording and try again.
MAX
MIN
MAX
MIN
REC SELECT
1 2 3 4 5/6 7/8 MASTER
R L PAN L R L R L R
0 10 EFFECT SEND 10 0 10 0 10 0
BRIT STACK US METAL 60'S COMBO
MIC
TUBE CONDENSER DYNAMIC
INPUT A
LINE MIC MIN MAX LINE MIC
DISTORTION
GUITAR
UNBAL
BAL
UNBAL
/GUITAR
PEAK
TRIM TRIM
BAL
INPUT A INPUT B
PHONES VOL
L
ST OUT
R
2
PHONES
1
MIN MAX
EFFECT
REVERB/DELAY TIME
MIN MAX HALL ROOM
PLATE DELAY
LOCATE REC END
A-B PLAY LOCATE ABS ZERO
DELETE +-_0 YZ9 VWX8 STU7
PLAY STOP RECORD REWIND F FWD
PQR6
UNDO/REDO PLAY MODE STORE A / IN B / OUT
LOCATE
MNO5 JKL4
BRIGHT NATURAL POWERFUL MENU/ENTER
MASTERING
GHI3 DEF2 ABC1
7/8 WAV FILE STEREO 1-4
1-6 NEW
SONG 1-8
GUIDE RHYTHM CONTRAST TIME BASE SELECT
BOUNCE
INPUT A SELECT
AUTO PUNCH
5/6
7/8
AMP SIMULATION
MIC SIMULATION
PEAK
1
3
2,4
<Important note>
You cannot punch in by only pressing the
[RECORD] key. You need to hold down the
[PLAY] key when pressing the [RECORD] key.
Press the [RECORD] key
while holding down the [PLAY] key.
(Punch in)
Press only the [PLAY] key.
(Punch out)
Playback Recording Playback
Punch in/out using the keys on the top panel