Fostex MR-8MKII - Manual (Page 112)

112
MR-8mkII Owner’s Manual (Part data editing)
9) Rotate the JOG dial to move the cursor to
"[ENTER]" on the screen, and press the
[MENU/ENTER] key.
The display shows "Please Wait", immediately
followed by "Completed" when the MR-8mkII
completes the move operation.
If you want to cancel the move operation, move
the cursor to "[CANCEL]" on the screen, and
press the [MENU/ENTER] key.
<Note>: If you are not satisfied with the re-
sult, press the [UNDO/REDO] key to undo
the operation (see page 103).
10) Press the [MENU/ENTER] key.
The display now returns to the part edit menu
screen, where “Move Part >” is highlighted.
11) Press the [STOP] key to exit the menu mode.
8) Rotate the JOG dial to select the destination
track(s), and press the [MENU/ENTER] key.
The display returns to the screen where
"Dest. Track = *" is highlighted.
flashing
flashing
flashing