Fostex MR-8MKII - Manual (Page 95)

95
MR-8mkII Owner’s Manual (Track data editing)
Track data editing
<Undo/redo of track editing>
By pressing the [UNDO/REDO] key after executing track editing, you can
undo the editing. By pressing the [UNDO/REDO] key after the undo opera-
tion, you can return the track(s) to the condition after being edited.
DELETE
UNDO/REDO
<Notes>: Also note that, if you carry out any of the follow-
ing after editing, you cannot undo the editing anymore.
1. Making new recording
2. Making new editing
3. Turning off the power
4. Loading another song
<Notes>: While a menu screen is shown, you can go up the menu screen level
or directly exit the menu mode by the following operations.
(1) Select “<< Back” on a menu screen and press the [MENU/ENTER] knob.
The display returns to the previous (upper level) screen. Repeating
this operation finally exits the menu mode.
(2) Press the [REWIND] key.
The display returns to the previous (upper level) screen.
Repeating this operation finally exits the menu mode.
(3) Press the [STOP] key.
The menu mode exits and the display shows the home screen.
This chapter describes the track data editing function for a recorded
song. "Track data" means all data from the beginning (ABS0) to the
end (REC END) of a song.
<Note>: With the default setting, you cannot undo or redo erasing track
data (while you can undo or redo all other track editing). Because eras-
ing track data completely deletes track data from a card, the free card
space increases after erasing track data. If you want to make it possible
undo or redo erasing track data, set the "Auto Delete" menu item of the
"System" menu in the MENU mode to "Off" (see page 135). In this case,
however, note that the free card space does not increase after erasing
track data.