Fostex MR-8MKII - Manual (Page 109)

109
MR-8mkII Owner’s Manual (Part data editing)
6) Rotate the JOG dial to select "Copy Track >", and
press the [MENU/ENTER] key.
The display now shows the screen for
selecting the copy source track(s).
You can select the copy source track(s) by
rotating the JOG dial.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
8) Rotate the JOG dial to move the cursor to
"[ENTER]" at the bottom of the screen, then press
the [MENU/ENTER] key.
The display shows "Please Wait", immediately
followed by "Completed" when the MR-8mkII
completes the part copy operation.
The display now returns to the part edit menu
screen, where “Copy Part >” is highlighted.
The procedure example below shows how to
paste the copied part data on the clipboard to
the LOCATE A point of the selected track.
7) Rotate the JOG dial to select the track(s) to be
copied, and press the [MENU/ENTER] key.
The display returns to the previous screen.
To cancel the part copy operation, move the
cursor to "[CANCEL]" at the bottom of the
screen, and press the [MENU/ENTER] key.
4) Rotate the JOG dial to select "Part Edit >", and
press the [MENU/ENTER] key.
The display now shows the part edit menu
screen, where "<< Back" is highlighted.
5) Rotate the JOG dial to select "Copy Part >", and
press the [MENU/ENTER] key.
The display now shows the screen for
selecting the source track(s).
"<<Back" is initially highlighted.
flashing
flashing