Fostex MR-8MKII - Manual (Page 93)

93
MR-8mkII Owner’s Manual (Song management)
You can protect a song to prevent an accidental erasure. The protection can be released when-
ever you want. To keep a recorded song safely, we recommend protecting it. You can make
protection setting only for the current song.
5) Rotate the JOG dial to select "On", and press the
[MENU/ENTER] key.
The current song is now protected.
The display returns to the previous screen.
To release the protection, carry out the same pro-
cedure above but select "Off" and press the
[MENU/ENTER] key in step 5.
1) Load the song you want to protect.
2) While the recorder is stopped, press the
[MENU/ENTER] key to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "<< Back" is
highlighted initially (selecting "<< Back"
returns to the previous screen).
3) Rotate the JOG dial to select "Song >", and press
the [MENU/ENTER] key.
The display now shows the song menu screen,
where "<< Back" is highlighted.
4) Rotate the JOG dial to select "Protect = Off", then
press the [MENU/ENTER] key.
The current option flashes.
The default option is "Off".
Protecting a song
<Note>: You cannot make recording or
editing to a protected song. If you want to
make recording or editing to a protected
song, you must release the protection first.
<Note>: When you set the protection to
"On", all the recording-related keys, such
as the [REC SELECT] and [BOUNCE] keys,
are turned off.
6) Press the [STOP] key to exit the menu mode.
<Tips>
When the protected song is loaded, “ ” is shown
in the upper left corner of the Home screen (in-
dicated by the arrow in the screen example be-
low).
When this icon is shown, you cannot make re-
cording or edit the song.
flashing
flashing