Fostex MR-8MKII - Manual (Page 108)

108
MR-8mkII Owner’s Manual (Part data editing)
You can copy the desired part(s) of the selected track(s) and paste it(them) to the other time
position of the desired track(s). Unlike the method described above in "Copying/pasting the
desired part(s) (1)", the part data is copied to the (virtual) clipboard and then pasted to the
specified position of the other specified track(s).
The copy/paste operation of a part or parts can be made only within the current song.
1) Load the song you want to edit.
2) Set the LOCATE A and LOCATE B points (see
page 51).
You can check the edited part(s) by playing
back between the LOCATE A and LOCATE B
points (see page 46).
3) While the recorder is stopped, press the
[MENU/ENTER] key to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "<< Back" is
highlighted initially (selecting "<< Back"
returns to the previous screen).
Copying to the clipboard
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
LOCATE A
point
LOCATE B
point
Clipboard
(Virtual)
ABS ZERO REC END
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
LOCATE A
point
Copying/pasting the part(s)-2
<Note>: You cannot copy/paste track data of a song
protected. Release the protection before making
the copy/paste operation.
<Note>: If you turn off the MR-8mkII after copy-
ing the part data to the clipboard, the data on the
clipboard is lost. Also note that you cannot undo
copying data to the clipboard.
<Note>: If you paste the part(s) to the same time
position of the other track(s), we recommend us-
ing the method described above in "Copying/past-
ing the desired part(s) (1)", because it works faster.
10) Press the [MENU/ENTER] key.
The display now returns to the part edit menu
screen, where “Copy-Paste Part >” is highlighted.
11) Press the [STOP] key to exit the menu mode.
<Note>: If you are not satisfied with the re-
sult, press the [UNDO/REDO] key to undo
the operation (see page 103).