FMI BVC-50Y - Manual (Page 13)

www.fmiproducts.com 122280-01E 13
Figure 12 - Typical Residential Installations
VEntInG InStaLLatIOn
Continued
VENTING INSTALLATION USING FMI
PRODUCTS, LLC VENTING SySTEM
FMI PRODUCTS, LLC chimney system
consists of 12", 18", 24", 36" and 48" snap-
lock, double-wall pipe segments, planned
for maximum adaptability to individual site
requirements.
WARNING: The opening in
collar around chimney at top of
fireplace must not be obstructed.
Never use blown insulation to fill
chimney enclosure.
Figure 13 - Chimney Pipes and Accessories
Hemmed
End
8" Stainless
Inner Pipe
12 3 /
8
"
Galvanized
Outer Pipe
PART NO. DESCRIPTION
12-8DM Pipe Section
18-8DM Pipe Section
24-8DM Pipe Section
36-8DM Pipe Section
48-8DM Pipe Section
RT-8DM Round Termination
RTL-8DM Round Termination
RTT-8DM
Round Termination with Slip
Section
RTTL-8DM
Round Termination with Slip
Section
ET-8DM Square Chase-Top
ETO-8DM Square Chase-Top with Mesh
ETL-8DM
Square Chase-Top with Slip
Section
ETLO-8DM Square Chase-Top with Mesh &
Slip Section
60E-8DM 60° Offset and Return
EFFECTIVE HEIGHT
OF TERMINATION CAP
UP TO
6 FT. MAX.
17 FT.
MINIMUM
HEIGHT
3 FT. MINIMUM
TO OFFSET
12 FT.
MINIMUM
HEIGHT