FUJITSU SRS-9924-ABM - Manual (Page 115)

NI NI
CUSTOM COMMANDS FOR NI SYSTEM ONLY
To TRANSFER a Call
If your phone lacks a TRANSFER button, ask your
Systems Administrator how to transfer a call.
Lucent:
1. Press TRANSFER.
2. Another CA/DN will be selected automatically and
you will hear the dial tone.
3. Dial third party.
4. Press TRANSFER and hang up.
Nortel:
1. Press CONFERENCE (NI 1) or TRANSFER (NI 2).
2. Another CA/DN will be selected automatically and
you will hear the dial tone.
3. Dial the third party.
4. Once connected, talk privately.
5. To complete the transfer, press TRANSFER and hang
up.
Siemens:
1. Press CONFERENCE.
2. Another CA/DN will be selected automatically and
you will hear dial tone.
3. Dial the third party.
4. Once connected, talk privately.
5. To complete the transfer, press TRANSFER and hang
up.
CUSTOM COMMANDS FOR 5ESS SYSTEM ONLY
To TRANSFER a Call
1. Press TRANSFER. (If no dial tone, press any idle
CA.)
2. Dial third party, or press any CA that is ringing or
on hold.
3. One connected, talk privately.
4. Press TRANSFER and hang up.
To DROP a Call
To disconnect the last party called, press DROP. For a
2-party call, pressing DROP hangs up the call and
provides new dial tone on the same CA.
To Forward Calls
(Call Forward Variable, Busy Line Forwarding, or
Don’t Answer Call Forwarding)
1. Press the feature button or dial the access code
for the forwarding option that you want.
2. To cancel, press that feature button or dial the
cancellation code.
To Use INSPECT
1. Press INSPECT feature button.
2. To view call information, press CA (idle CA displays
NO CALL.)
3. To view function assigned to feature button, press
the feature button.
4. To stop, press INSPECT again.