FUJITSU SRS-9924-ABM - Manual (Page 69)

5-1
5
NI
/
5E Custom
T
e
rminal Installation
Required Steps
CHAPTER 5
INSTALLATION
These instructions are intended mainly for System
Administrators, service personnel or end users who
are installing the terminal.
Installation involves four main steps:
• Connecting the set to the network.
It’s necessary to determine the type of Telephone
Company switching equipment in use for
proper connection to the Telephone Company
network. Implementation procedures vary from
one manufacturer to another.
Switch Manufacturer
DMS-100 Nortel
5ESS Lucent National ISDN
EWSD Siemens
5E Custom Lucent
• Setting-up Service Profile IDentifiers (SPIDs).
• Loading network data. This may be
accomplished by two methods: 1) The most
common method is downloading of features
from the switch, or 2) In unusual situations,
manual configuration of multifunction buttons.
• Programming and labeling the set. (Labeling
the set is described in Chapter 6.)
UNA L-DIR CLEAR OPTIONS
1 2 3 4
Menu
Standard Softkey Layout
NI ONLY