FUJITSU SRS-9924-ABM - Manual (Page 84)

5-16
5
NI
/
5E Custom
T
e
rminal Installation
NI ONL
Y
The final screen looks like this:
DN=XXXXXXX (XX)
COMPLETED
If you canceled the current assignment, no
numbers appear after DN= and the button
indicator goes dark.
Note: If you are assigning multifunction button
1, you must enter the set’s primary Directory
Number.
6. With your Directory Number assignment
complete, you have these choices:
• To assign another DN button, press the desired
button and repeat steps 4 and 5.
• To return to normal operation, press OPTIONS.
• To make additional button assignments, press
any red-lit button and then press asterisk (*).
This returns you to the menu mode main
menu.
This completes the programming of Directory
Numbers. If you have programmed your SPID
correctly, completed this procedure, and your ISDN
line is properly plugged in, you should now be
ready to place and receive voice calls. If you
encounter problems, review these procedures for
accuracy.
4 ENTER
ICM/GIC MODE
SELECT ASSIGN KEY
From this point, you may assign Intercom and
Group Intercom keys using the same process used
for Call Appearances.
Selection 4:
Intercom/Group
Intercom