Using the ni / 5e custom t e rm inal set-up – FUJITSU SRS-9924-ABM User Manual
Page 43
3-7
3
Using the
NI
/
5E Custom
T
e
rm
inal Set-Up
2. Press the one-touch button whose number you
wish to change or cancel. The ENTER
DIRECTORY NUMBER screen appears showing
the currently assigned number:
ENTER DIRECTORY NUMBER
DN=8247629,99,,2502
(12)
If the number stored on the one-touch button is
more than 16 digits, a right arrow (➔) appears at
the end of the line of numbers, indicating that
additional numbers exist. To see the additional
numbers, press NEXT. Pressing NEXT repeatedly
alternates between the two displays.
ENTER DIRECTORY NUMBER
DN=94783664,1994,,7
(14)
ENTER DIRECTORY NUMBER
DN=
437709
(14)
3. Complete the procedure in one of these ways:
•
To change the number, enter a new number.
Then press ENTER.
The new number appears on the display as you
enter it, and replaces the old number.
•
To cancel the number, press CLEAR and then
ENTER. The button is canceled as a one-touch
button, and the green indicator goes dark.
•
To leave the number unchanged, press
OPTIONS to return to the normal display.