FUJITSU SRS-9924-ABM - Manual (Page 50)

3-14
3
Using the
NI
/
5E Custom
T
e
rm
inal Set-Up
Handsfree Non
Supported
Using the
Handset or a
Headset
Disallows speaker use. The SPKR button is disabled.
Call pickup and hanging up on calls is by handset
only.
1.
OPTIONS 6 ENTER
HAND-SET/HEAD-SET MODE
HAND-SET
2. Press ENTER, and this screen appears:
1: HAND-SET 2: HEAD-SET
(SELECT 1-2)
3. Press 1 or 2 to select your choice.
4. Press ENTER. This screen appears:
HEAD-SET or HAND-SET
COMPLETED
You can now operate the terminal using only your
headset. The SPKR button controls picking up and
hanging up calls, and the MIC-OFF button is not
operational <SRS-9924>. The sounds that are
usually audible through the speaker, such as the
key tones, are now audible only through the
headset.
This local feature allows you to:
• Change the volume and tone of the ringer.
• Select the ringer mode, either normal ring or
silent ring.
• Select the ringing sound you will hear when
you are conversing on another line.
To set the ringer volume, follow these steps:
1.
OPTIONS 7 ENTER
RINGER SERVICE MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . .
CHANGING
RINGER MODE
Setting Ringer
Volume