FUJITSU SRS-9924-ABM - Manual (Page 29)

2-7
2
Using the T
e
rminal
5E Custom
ONLY
These assignments are not used for 5E Custom
ISDN.
If there are no idle CA’s available, pressing REDIAL
brings the number to the screen but does not dial.
When an idle CA later becomes available, pressing
the CA button dials the number.
1. To use hold, press HOLD while you have an
active call in progress. The CA LED changes
from steady red to flashing red.
2. To reconnect with a call on hold, press its
flashing CA button. Its LED changes from
flashing red to steady red, and you are
reconnected.
The autohold feature automatically puts an active
call on hold whenever you press another CA.
Conference is a network-based feature that you
must subscribe to from your telephone company.
The number of conference call participants allowed
depends on the number specified when you
subscribe to the feature. Ask your System
Administrator how many participants are allowed.
After establishing the initial call, add participants
to the conference call by following these steps:
1. Press CONF.
The CONF button lights up. The initial call is
placed on hold, and the next available CA is
selected.
2. Dial the number of the person you want to add
to the conference.
or
Select any CA that is ringing or on hold.
REDIAL
Dials the last
number dialed
on this phone
HOLD
Retains
connection with
an existing call
until you can
return to it
CONFERENCE
Telephone
conferences
with multiple
participants
Setting Up a
Conference Call