FUJITSU SRS-9924-ABM - Manual (Page 78)

5-10
5
NI
/
5E Custom
T
e
rminal Installation
NI ONL
Y
NEXT
4: ICM/GIC
6: TRANS
5: CONF
(SELECT 1-9)
NEXT
7: ORIG DN
9: DSGN CA
8: CA RESV
(SELECT 1-9)
Note: The following descriptions begin with
selections from these nine items.
Your NISDN terminal’s first button is set at the
factory as CA=1. There is no need to change this
when using the CACH mode of managing calls.
On a DMS NI1, it may be necessary to reset button
1 to be a DN. See instructions under Selection 3,
in this section.
Your service provider will provide you with Call
Appearance Numbers and associated Telephone
Numbers. Example: Telephone Number 555-1212
is your Primary Directory Number and occupies
CA 1, 2, and 3. Telephone Number 555-3333 is a
secondary or shared Telephone Number and
occupies CA 4, 5, and 6. Note that CA numbers
are always distinctive.
1.
1 ENTER
CALL APPEARANCE MODE
SELECT ASSIGN KEY
The set’s indicators show button status as follows:
• Green indicates a button already assigned to
a Call Appearance.
• Red indicates a button already assigned to a
DN, to a network feature, or to a local feature
such as one-touch.
• Unlit indicates an unassigned button.
Selection 1:
Call Appearance
(CACH Call
Buttons)