Headset calls -4, Using the t e rminal – FUJITSU SRS-9924-ABM User Manual

Page 26

Advertising
background image

2-4

2

Using the T

e

rminal

Receiving
Handsfree Calls
<SRS-9924>

Group Listening
or Monitoring
<9912>

1. Press SPKR and, if necessary, the green-flashing

CA button.

2. Converse with the calling party.

3. Hang up by pressing SPKR.

Examples for using this function:

Press SPKR to access and listen to voice mail
messages.

For onhook dialing - pick up the handset when
your party answers.

Check that headset mode is activated on your
telephone. The handset, speaker, and microphone
will be disabled. All dialing tones and telephone
conversation will be audible only through the
headset. Your voice and any other transmitted
sounds will go through the headset microphone
only. Refer to Chapter 3 for instructions on how to
set-up headset mode.

1. Press SPKR. Its LED will light red and you will

hear a dial tone.

2. Dial the desired number.

3. Converse with the called party, then hang up

by pressing SPKR.

1. Press SPKR, and if necessary, press the green-

flashing CA button.

2. Converse with the calling party.

3. Hang up by pressing SPKR.

Note: These procedures assume that the phone

is set to ringing line preference or primary
line preference.

Placing
Headset Calls

Receiving
Headset Calls

Advertising