FUJITSU SRS-9924-ABM - Manual (Page 72)

5-4
5
NI
/
5E Custom
T
e
rminal Installation
NI ONL
Y
Auto-SPID If your switch supports Auto SPID, this function
starts when either the terminal is powered-on and
a SPID is not present, or when the SPID has been
manually cleared.
Auto-SPID displays the following screens:
AUTO SPID REQUESTING
If only one SPID available, the SPID is assigned,
and this screen is displayed:
SPID SELECTION COMPLETED
50555512120101
If two or more SPIDS are available, you must select
a SPID.
Scroll through the available SPIDS. Press ENTER
when the “>” is indicating the correct SPID.
1>50555512120101 SP/AU/PB
50555512130101
Press the # key to scroll forward through the SPID
numbers, (use the * key to scroll backward) then
press ENTER to select a number.
SPID SELECTION COMPLETED
50555512120101
After SPID selection is complete, an automatic
download is requested from the switch. You
should be able to begin using your phone after
the download is complete.
To enter Service Profile IDentifiers manually, follow
these steps:
1.
OPTIONS 8 ENTER
The message ENTER VOICE SPID appears, with the
current SPID number (if any) shown below it.
Manual SPID
Entry (For 5E
Custom and for
NI)