FUJITSU SRS-9924-ABM - Manual (Page 37)

3-1
3
Using the
NI
/
5E Custom
T
e
rm
inal Set-Up
MENU MODE
OPERATIONS
CHAPTER 3
TERMINAL SET-UP
The terminal has a menu from which you select
options to change local features.
Note: Setting up the SPID (option 8) is described
in Chapter 5.
The procedures to set local features require the use
of the softkeys located below the display. To see
the names of the softkeys, press MENU. The names
appear on the second line of the display above the
keys. Press MENU again to redisplay the information
displaced by the softkey labels. You can use the
softkeys any time, whether or not the names are
showing.
UNA L-DIR CLEAR OPTIONS
1 2 3 4
Menu
Standard Softkey Layout
Some of the data entry screens in menu mode
procedures have built-in timers. If you do not enter
information within six seconds, the display reverts
back to the menu for selecting the feature you were
using. You must reselect the feature and start over.
Once you access the menu, the softkeys are used
as shown below for ENTER, NEXT, CLEAR and EXIT.
ENTER NEXT CLEAR EXIT
1 2 3 4
Menu