FUJITSU SRS-9924-ABM - Manual (Page 87)

5-19
5
NI
/
5E Custom
T
e
rminal Installation
NI ONL
Y
The first step is to designate the CA or Directory
Number that you will typically use for outgoing calls.
This is called the Originating DN. If you do not
subscribe to Call Appearance Reservation, you do
not need to follow the steps in Selection 7 or
Selection 8.
1. To manually assign the Originating Directory
Number key for your terminal, press 7, ENTER
to view the following display:
ORIGINATING DN MODE
SELECT ASSIGN KEY
2. Press the selected Multi-assign key.
ORIGINATING DN MODE
ORIGINATING DN = ON (1)
3. Press ENTER. The following display is shown.
You have the option to turn the selected key
ON or OFF.
1:ON 2:OFF
SELECT ITEM (1-2)
4. Press 1 or 2 to change the current status, or
press ENTER to accept the current status.
ORIGINATING DN = ON (1)
COMPLETED
Note: If an invalid key is selected for the originating
Directory Number, the following display is
shown.
ORIGINATING DN REGISTRATION (XX)
INVALID SELECTION