Fostex FR-2 - Manual (Page 27)

27
FR-2 Field Memory Recorder (Chapter 2: Before using the FR-2)
• Removing a card
REC STBY REC
0
1
2
3
4 6
7
8
9
10
5
ACCESS
PEAK
R L
SHIFT
/ENTER
RELEASE
CARD
MENU
HOME /
FILE
CUE
PREV. NEXT
CONTRAST DEL CUE
LIGHT MARK CUE
HOLD RESET
FR-2 FIELD MEMORY RECORDER
PHONES
MONITOR
MAX OFF
SP/HP
3) While CFC indicator is lit, press the eject key and pull out the memory card from the
slot.
[CARD RELEASE] key
1) While the recorder is stopped, press the [CARD RELEASE] key.
Pressing the [CARD RELEASE] key brings up the screen as shown below. This screen
shows that a CFC is inserted and mounted, while no ATA is inserted, and is asking
whether releasing the CFC or not.
2) Use the [MENU] dial to select "[YES]" and press the [ENTER] key.
The display shows "Please Wait!", followed by "CARDS Release OK!". When the card is
completely released, the CFC indicator lights.
Eject key for slot (1)
"Mounted" and "No Card" shown on screens above mean as below.
Eject key for slot (2)
The power is delivered to the card drive (the indicator is unlit). You can-
not eject the card until the card is released.
No card is inserted to the slot.
The following describes how to remove a memory card from the slot, assuming
that a CFC is inserted to the appropriate slot.
R L/MONO
ANALOG IN POWER ANALOG OUT
L/MONO
PHANTOM
3
2
1
COLD
GND
HOT
ON
OFF
COMPACTFLASH CARD
PCMCIA
CFC indicator
PCMCIA indicator