Fostex FR-2 - Manual (Page 85)

85
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Adjusting the real time clock (Adjust Real Time)
1) Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select "AdjustRealTime" and press the [ENTER] key.
The current date and time according to the realtime clock is shown on the display in
realtime.
3) Use the [MENU] dial to select "Edit" at the bottom and press the [ENTER] key.
The current time data is hold and you can edit the data (the year field starts flashing).
4) Use the [MENU] dial to enter the desired time data.
By pressing the [ENTER] key after entering a value to the year field, the cursor
automatically moves to the month field.
If you do not change the year field, simply press the [ENTER] key.
Enter a desired value to each fields in the same manner.
While the realtime clock is running, you can reset the second field to "00" by
pressing the [ENTER] key while "Set 00s" is selected. When the second field shows
a value between 00 and 29, only the second field is reset to "00". When the second
field shows a value between 30 and 59, the minute field value is counted up and
the second field is reset to "00".
This menu item sets the internal realtime clock. When the FR-2 is shipped, the
realtime clock is adjusted to the local standard time. You can adjust the clock to
your standard time by the following procedure.
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ keys
key