Fostex FR-2 - Manual (Page 63)

63
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Cue menu)
Cue menu
The Cue menu offers the following four menu items.
* Locate: locating to a desired cue point
* Rename: Renaming a cue point
* Edit: Editing time data of a cue point
* Delete: Deleting a cue point
<Note>: To carry out operations of Cue menu items, one or more cue points must be set to the
current audio file.
Locating to a cue point (Locate)
1) Use the [MENU] dial to select "Cue" and press the [ENTER] key.
The display now shows the cue point list in which all cue points stored in the current file
are shown.
2) Use the [MENU] dial to select a desired cue point and press the [ENTER] key.
The display now shows the Cue menu.(In the screen example above, "C01:Mark01" is
selected.)
In the screen example above, five cue points are stored with the default cue names. Up
to five cue points can be shown on a single page. If more than five cue points are
stored, the list screen has more than one page.
At the upper right of the screen, you can see the current page and the total page
number. If "(01/02)" is shown, the cue point list has 2 pages and the display currently
shows page 1).
When the cue point list is shown, you can see the time data of each cue point by
pressing and holding down the [SHIFT] key. Releasing the [SHIFT] key returns the
screen to show the file name.
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.
3) Use the [MENU] dial to select "Locate" and press the [ENTER] key.