Fostex FR-2 - Manual (Page 32)

FR-2 Field Memory Recorder (Chapter 3: Names and functions)
32
Front panel
REC STBY REC
0
1
2
3
4 6
7
8
9
10
5
ACCESS
PEAK
R L
SHIFT
/ENTER
RELEASE
CARD
MENU
HOME /
FILE
CUE
PREV. NEXT
CONTRAST DEL CUE
LIGHT MARK CUE
HOLD RESET
FR-2 FIELD MEMORY RECORDER
PHONES
MONITOR
MAX OFF
SP/HP
1
2
3 4 5 6 7 8 9 10 11
12 13 14 15 16
1) [PHONES] jack
Connects headphones for monitoring.
Inserting a plug automatically disables the internal monitor speaker.
Note that, regardless of the setting of the "Speaker Mute" menu item on the Setup mode in
the MENU mode, the [PHONES] jack always feeds audio.
See "Speaker mute function on/off" on page 86 for details about "Speaker Mute" setting.
2) [SP/HP MONITOR] control
Adjusts the monitor level of headphones and the internal monitor speaker.
You can push down the control to the same level as the panel. Pushing the control again
raises it up. Turning the control counterclockwise until clicked turns off the monitor sound.
3) LCD display
Displays various kinds of information including audio input/output levels, settings, etc.
See "About the LCD display" on page 39 for details.
4) [HOME/HOLD RESET] key
This key works in the following situations.
<While the HOME screen is shown>
Resets the peak hold on the meters.
<In the MENU mode>
Exits the MENU mode and returns the display to the HOME screen.
5) [SHIFT] key
To make a SHIFTed function active, press a key which provides its SHIFTed function while
holding down the [SHIFT] key.
Each SHIFTed function is labeled in a rectangular box below the key.
6) [CUE ] key
If cue points (CUE 01 ~ 99) are stored in the current file, pressing this key skips back to the
previous cue point. Pressing this key repeatedly skips back to the associated cue point.
When more than one file exists on the card, pressing this key while holding down the
[SHIFT] key switches the current file to the previous entry in the file list.