Fostex FR-2 - Manual (Page 57)

57
FR-2 Field Memory Recorder (Chapter 5: Recording/playback)
Viewing cue point information
On the Home screen, you can see the total number of cue points currently stored,
as pointed by the arrow below.
In the screen example below, eight cue points are currently stored and the current
recorder position is "ABS 0".
Deleting a cue point in real-time
During playback (or while stopped), pressing the [MARK CUE] key while holding
down the [SHIFT] key deletes the cue point before the current recorder position in
real-time.
For example, if the cue point information on the Home screen shows "C 03/08",
operating as above deletes cue 03.
REC STBY REC
0
1
2
3
4 6
7
8
9
10
5
ACCESS
PEAK
R L
SHIFT
/ENTER
RELEASE
CARD
MENU
HOME /
FILE
CUE
PREV. NEXT
CONTRAST DEL CUE
LIGHT MARK CUE
HOLD RESET
FR-2 FIELD MEMORY RECORDER
PHONES
MONITOR
MAX OFF
SP/HP
[MARK CUE] key
[SHIFT] key
<About cue point information>
The cue point information field on the Home screen looks different depending on the cur-
rent recorder position and the total number of cue points currently stored.
The following table shows some examples of cue point information.
This information field helps you when deleting a cue point (see the next paragraph below).
"C 00/08"
The total number of cue points currently stored is eight.
The current recorder position is REC END.
"C E/08"
No cue point is stored. The current recorder position is between ABS 0 and REC END
(including ABS 0, excluding REC END).
"C 00/00"
The total number of cue points currently stored is eight. The current recorder position is
between CUE 02 and CUE 03 (including CUE 02, excluding CUE 03).
"C 02/08"
The total number of cue points currently stored is eight. The current recorder position is
between ABS 0 and CUE 01 (including ABS 0, excluding CUE 01).