Fostex FR-2 - Manual (Page 28)

28
FR-2 Field Memory Recorder (Chapter 2: Before using the FR-2)
<Notes on ejecting a card when both CFC and ATA are inserted>
When both CFC and ATA are inserted to slots (1) and (2) respectively,
pressing the [CARD RELEASE] key brings up the screen as shown below.
This screen example shows the current card is a CFC and the power is
supplied to the CFC card drive, while an ATA is not mounted. Therefore,
you can eject the ATA, while cannot eject the CFC. In this condition, the
CFC indicator beside the eject key is unlit, while the PCMCIA indicator is
lit. (“Not Mounted” : No power is delivered to the card drive and you can
eject the card (the indicator is lit).
To remove the CFC, select "YES" on the screen and press the [ENTER] key,
then press the eject key after the display shows the screen below.
"Mounted" and "Not Mounted" shown on screens above mean as below.
The power is delivered to the card drive (the indicator is unlit). You can-
not eject the card until the card is released.
No power is delivered to the card drive and you can eject the card (the
indicator is lit).