Fostex FR-2 - Manual (Page 93)

93
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Selecting the USB keyboard type (Keyboard)
1) Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select "Keyboard" on the third page and press the [ENTER]
key.
The current setting (by default, "US") starts flashing.
3) Use the [MENU] dial to select the desired keyboard type and press the [ENTER] key.
You can select between "US" and "JAPAN".
By pressing the [ENTER] key after selecting the desired type, the setting is fixed and the
display returns to show the previous screen.
4) Press the [HOME] key to exit the MENU mode.
<Note>: Fostex does not guarantee keyboard operations if you use a keyboard with built-in
USB hub, USB mouse or PS2 mouse.
Also note that, some keyboards do not work correctly until pressing any key after connec-
tion is made.
This menu item selects the USB keyboard type (between "US" and "JAPAN") to
match the keyboard connected to the [USB (KEYBOARD ONLY)] port on the left
side panel. The following description is assumed that the FR-2 is now in the MENU
mode by pressing the [ENTER] key while the recorder is stopped.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ keys
key