Fostex FR-2 - Manual (Page 77)

77
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Disk menu)
Editing a volume label of a memory card (Volume Label)
The cursor in [ ] is called "volume label cursor", while the cursor in the character options
is called "character selection cursor".
You can move the character selection cursor by using the [MENU] dial.
3) Enter the desired volume label.
See the table below for details about how to enter a volume label. Up to 11 characters can
be entered.
1) Use the [MENU] dial to select "Disk" and press the [ENTER] key.
The display now shows the Disk menu.
2) Use the [MENU] dial to select "Volume Label" and press the [ENTER] key.
The display now shows the screen as below, on which you can edit the volume label of the
currently selected memory card. In the screen example below, the default volume label is
"PCM000".
To edit a character high-
lighted (on the cursor po-
sition) Use the [MENU] dial to select a desired character from among the character
options, and press the [ENTER] key. The selection is fixed and the volume label
cursor moves right.
To move the volume label
cursor position Use [I<<] or [>>I] key. Or use the [MENU] dial to select "<-" or "->" in the charac-
ter options, and press the [ENTER] key.
Inserts a front space at the
volume label cursor posi-
tion
After moving the volume label cursor to the desired position, move the character
selection cursor to "INS" at the bottom, and press the [ENTER] key. (The FR-2 is
put into the INSERT mode and the volume label cursor condition changes to be
lit solid.) After that, select the character that you would like to insert by the char-
acter selection cursor and press the [ENTER] key again. In order to cancel the
INSERT mode, select the "INS" and then the [ENTER] key. (The volume label
cursor condition changes to be flashing.)
To delete a character on
the volume label cursor
position
After moving the volume label cursor to the desired position, move the character
selection cursor to "DEL" at the bottom, and press the [ENTER] key.
When a memory card is formatted, the default volume label is automatically given.
You can edit this volume label to the desired one.
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.