Fostex FR-2 - Manual (Page 67)

67
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Cue menu)
<Note>: If you are going to store illegal time data, "Illegal time!" flashes on the
display and you cannot store the time.
Deleting a cue point (Delete)
1) Use the [MENU] dial to select "Cue" and press the [ENTER] key.
The display now shows the cue point list in which all cue points stored in the current file
are shown.
2) Use the [MENU] dial to select a desired cue point and press the [ENTER] key.
The display now shows the Cue menu. In the screen example above, "C01:Mark01" is
selected.
3) Use the [MENU] dial to select "Delete" and press the [ENTER] key.
The FR-2 starts deleting the selected cue point. When completed, "Completed!" is shown
on the screen and the display shows the Home screen, on which you can see the number
of cue points decreases by one.
If you switch to the cue point list screen, you can see "Mark01" has been deleted, while
"Mark02" and subsequent cue points slide up, as shown in the screen example below.
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
Numeric keys You can directly enter time data.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ key
key
/ key
key