Fostex FR-2 - Manual (Page 72)

72
FR-2 Field Memory Recorder (Chapter 6: MENU mode/File menu)
Audio file protection on/off (Protect)
1) Use the [MENU] dial to select "File" and press the [ENTER] key.
The display now shows the audio file list in which all recorded audio files on the current
card are shown. If more than five audio files are stored, the list screen has more than one
page.
2) Use the [MENU] dial to select a desired audio file and press the [ENTER] key.
The display now shows the File menu. In the screen example above, file "003" is selected.
3) Use the [MENU] dial to select "Protect" and press the [ENTER] key.
The current protect setting (by default, "Off") starts flashing.
4) Use the [MENU] dial to select the desired option ("ON" or "OFF") and press the
[ENTER] key.
The selection is fixed and the display returns to the File menu.
5) Press the [HOME] key to exit the MENU mode.
On the Home screen of a protected file, " " is shown at the end of the file name,
indicating that the file is protected.
<Note>: You cannot make any editing operation, as well as delete a protected file.
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ key
key