FUJITSU LIFEBOOK 990TX2 - Manual (Page 130)

S e c t i o n F o u r
120
C A U T I O N
The system must be in Suspend mode
before attempting to insert a device into
either of the Multi-function Bays. Failure
to do so can cause damage to your
notebook or the device.
5. Slide the device firmly toward the back of
your notebook until it clicks into place.
6. Press the Suspend/Resume Button to reacti-
vate the notebook from the Suspend mode.
7. The Tioman software will automatically
detect the new device and place it online.
Installing a Device in Multi-function Bay 2
3. Orient the device to be installed with the
connector toward the body of your notebook
and closer to the up side of the device.
(Figure 4-3.)
4. Align the grooves on the sides of the
device with the tracks in the sides of the bay.
(Figure 4-3.)
Installing a Device in Multi-function Bay 1
3.Orient the item to be installed with the con-
nector toward the body of your notebook
and the flat side of the device with the
little metal square toward the body of
your notebook.
4. Align the grooves on the side of the
device with the tracks in the side of the bay.
(Figure 4-2.)
5. Slide the device toward the back of your
notebook until it clicks into place. Make sure
that the release button has fully returned to
its latched position.
6. Press the Suspend/Resume Button to reacti-
vate the notebook from the Suspend mode.
7. The Tioman software will automatically
detect the new device and place it online.