FUJITSU LIFEBOOK 990TX2 - Manual (Page 171)

T r o u b l e s h o o t i n g
L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u
161
6. The batteries are too hot or too cold. 6. Restore the notebook to normal operating
(See Batteries on page 26.) temperature. (The Charging indicator on
the Status Indicator panel will flash when
the battery is outside its operating range.)
Shutdown and Startup Problems
The Suspend/Resume button does not work. 1. The Suspend/Resume button is disabled from 1. Enable the button from the setup utility.
the Advanced submenu of the Power Savings (See page 102.)
menu of the setup utility.
2. You did not hold the button in long enough. 2. Hold the button longer. This may need to
be a very long time if your application is
preventing the CPU from checking for
button pushes.
3. There may be a conflict with the 3. Close all applications,and try the
application software. button again.
The system powers up, and displays the 1. The boot sequence settings of the setup utility 1. Set the operating source by pressing the Esc
power on information, but fails to load the are not compatible with your configuration. key while the Fujitsu logo is on screen or use
operating system. the F2 key and enter the setup utility and
adjust the source settings from the Boot
menu on pages 106–107.
Symptom Possible Cause Possible Solution