FUJITSU LIFEBOOK 990TX2 - Manual (Page 140)

S e c t i o n F o u r
130
6 . Al i gn the con n ector of the MIDI devi ce and the
ad a pter cable con n ector.
7. Push the connectors together until seated and
then tighten the screw locks on either side of
the connectors.
To Disconnect a MIDI/Joystick Device:
1. Close all files and exit all applications
2. Turn off power to your notebook, close the
display and remove the AC adapter. (See
pages 24–25 for more information.)
3. Squeeze the releases on the sides o f the MIDI
device connector together. (The connector
is next to the body of your notebook.)
(Figure 4-13.)
4. Pull the connector free.
5. Close the port cover on your notebook by
pushing it down and pressing it into the side
of your notebook until it latches.
6. Unscrew the locking screws on either side of
the connectors for the MIDI device and the
adapter cable.
7. Pull the adapter cable free of the
MIDI device.
THEFT PREVENTION LOCK
A physical security system lock can be installed
on the right side of your notebook. (See Figure
1-5 on page 7 for the location of the lock slot.)
Simply insert the key end of your security
system in the slot, rotate 90 degrees and lock.
(See Figure 1-5 on page 7.)
Joystick
Connector to
Connector
Locking Screws
Port Cover
Connector Release Buttons
Figure 4-13 Installing a MIDI/joystick Device