FUJITSU LIFEBOOK 990TX2 - Manual (Page 137)

U s e r I n s t a l l a b l e F e a t u r e s
L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u
127
C A U T I O N
Do not insert a PC Card into a slot if there
is water or any other substance on the
card. If you do, you may permanently
damage the card, your notebook, or both.
C A U T I O N
Some PC Cards can only be installed
or removed with the power in Suspend
mode or off. Please check the card
documentation for correct usage.
C A U T I O N
Installing or removing a card while your
notebook is in the process of going
through the power on or power off
sequence may damage the card and/or
your notebook.
To install a PC Card:
1. See your PC Card manual for instructions on
installation of that specific card.
2. Make sure that there is not already a PC Card
in the slot you wish to use (1 or 2). If there is,
eject it,as described in Removing PC Cards
on page 128.
PC Card Lock Eject Button Slot 2
PC Card Eject Button Slot 1
Figure 4-11 Installing and Removing a PC Card
3. Insert the PC Card in the card slot, with the
product name label facing up. (Figure 4-11.)
4. When the card is installed,lock it in place
by sliding the lock button to the right.
(Figure 4-11.)