FUJITSU C150-E049-02EN - Manual (Page 168)

M3099GX/GH OEM Manual 4-11
BASIC
OPERATION
4 Rotate the lamp so that the
two terminals on each and
align with the exit slot on
the lamp socket.
Maintain the alignment and
remove the lamp from the
lamp sockets.
CAUTION
Be careful not to pull the wire
of the heater hard.
Upper transport unit Operator panel
Lever
Power switch
3 Remove the two lamp
socket covers (U-shaped
spring clips) by pulling
them out of their positions.
Wire of the heater
Lamp
Upper transport unit
Lamp socket covers
Replacing the front-side lamp
1 Turn off the power switch.
2 Open the upper transport
unit. (See page 4-2)