FUJITSU C150-E049-02EN - Manual (Page 198)

M3099GX/GH OEM Manual 8-3
CLEANING
4 Rotate the lamp so that the
two terminals on each and
align with the exit slot on
the lamp socket.
Maintain the alignment and
remove the lamp from the
lamp sockets.
CAUTION
Be careful not to pull the wire
of the heater hard.
5 Clean the lamp with a dry
cloth.
CAUTION
• Be careful not to peel the
tape on the heater.
• If any visible damage on the
heater is observed, please
contact manufacturer's
authorized service center for
proper repair service.
Lamp
Wire of the heater
Upper transport unit
#08 Chapter 8 98.2.22, 1:53 PM 3