FARGO electronic Quatro ID Card Printer - Manual (Page 15)

2. Remove a stack of 50 or fewer cards from the card
packaging. Do not touch the area of the cards on which you
intend to print. Oil or dirt from your hands can impair print
quality. Handle cards only along the edges.
3. Load the stack of cards into the printer by depressing the
spring loaded Card Input Tray and pushing the stack all the
way to the front of the Card Input Hopper. Always load
cards with the top or primary print side facing up.
If inserting cards with a magnetic stripe, be sure the
magnetic stripe is positioned downward and that the
stripe is oriented toward the rear of the printer. If
inserting smart cards, be sure the end of the card
containing the smart card chip is inserted first.
4. Once the cards have been inserted, remove the top card and
throw it away if you suspect it has been contaminated with
oil from your fingertips. Close the printerÕs Top Cover.
Ribbons and Cards 11
Card Stack
Card Input Tray
Quatro/510323 v3 1/8/99 10:48 AM Page 11