FARGO electronic Quatro ID Card Printer - Manual (Page 19)

4. Follow the on-screen instructions to complete installation.
When prompted, do not have Windows print a test print,
since you most likely performed a printer self test in
Chapter 3. Once installed, the ÒColor ID Card QuatroÓ
printer icon will appear in the Printers folder.
NOTE: Occasionally, new printer driver versions are released which have
new or updated features. Before installing an updated printer driver
version, always delete the existing printer driver version from your
system. To do this, simply select the printer driver icon from within
the Printers folder, and press the Delete key. A message may appear
saying, ÒSome files were used only for this printer and are no longer
needed. Would you like to delete these files now?Ó If you have
FargoColor and/or the 32-Bit Print Spooler installed, select NO. If
none of these applications apply, select YES.
Windows 3.1x:
To install the printer driver into Windows 3.1x, refer to the
following:
1. After starting Windows, go to the Main program group
and select Control Panel.
2. From the Control Panel, select Printers.
3. Select Use Print Manager from the bottom left of the
Printers window.
4. Select the Add>> button.
5. Highlight the Install Unlisted or Updated Printer option
from List of Printers.
6. Select the Install button.
7. Insert the supplied Printer Driver diskette into your
computerÕs disk drive. If you insert the diskette in a drive
other than the A: drive displayed in the Install Driver
dialog box, you must change the drive designation. Select
the OK button.
8. ÒColor ID Card QuatroÓ should now be listed in the Add
Unlisted or Updated Printer dialog box. Select the OK
button. Your PCÕs disk drive will now load the printer
driver. Depending upon your computer, loading will take
about 10 to 20 seconds.
Using the Quatro ID Card Printer 15
Quatro/510323 v3 1/8/99 10:48 AM Page 15