FARGO electronic Quatro ID Card Printer - Manual (Page 31)

Maintenance 27
Chapter 5: Maintenance
Your Quatro ID Card Printer is built to require a minimum
amount of maintenance. Nevertheless, there are a few
procedures you can perform on a regular basis or as needed to
ensure the best possible performance. Use the illustration
below to locate the items discussed within this chapter.
I. SUPPLIES REQUIRED
For the maintenance procedures outlined in this chapter, you
will need the following items:
¥ Isopropyl alcohol
¥ Acetone
¥ Standard clear adhesive tape or masking tape
¥ Soft, lint-free cloth
Or, to make these maintenance procedures more convenient, a
Printer Cleaning Kit is available from your authorized reseller.
This optional kit includes the following:
¥ Printhead Cleaning Pens pre-moistened with 99.99%
isopropyl alcohol for cleaning your printerÕs printhead.
¥ Cleaning Cards with an adhesive backing for
automatically cleaning your printerÕs gray card feed rollers
and cleaning rollers.
¥ Cleaning Pads pre-moistened with 99.99% isopropyl
alcohol for cleaning your printerÕs drive roller and general
inside area.
Card Feed Rollers Printhead
Drive Roller Cleaning Roller Assembly
Printhead
Assembly
Quatro/510323 v3 1/8/99 10:48 AM Page 27