FARGO electronic Quatro ID Card Printer - Manual (Page 25)

Using the Quatro ID Card Printer 21
generating a darker print. This slide only affects those images
printed with dye-sublimation ribbon panels (YMCB). As a
result, this slide will not appear if printing with a resin-only
ribbon.
To control the amount of heat the printer uses when printing
with the resin black panel of a full-color ribbon or when
printing with a resin-only ribbon, adjust the Resin Heat slide.
Moving the slide to the left causes less heat to be used in the
printing process, causing resin images to be lighter or less
saturated. Moving the slide to the right causes more heat to be
used, causing resin images to be darker or more saturated. This
control can be helpful for fine tuning the saturation of resin text
and bar codes.
When the Algebraic color matching option is selected, all control
options will display and can be adjusted. When the None or
FargoColor option is selected, only the Dye-Sub Intensity and
Resin Heat sliders will display.
Dither Mode
This option only effects objects printed with a monochrome
resin ribbon type. Click on the Dither Mode down arrow and
select the appropriate dither method according to the type of
image you are printing.
Fast 32-bit Spooler
Select this option for consistently faster print processing. This
option is only selectable if operating under Windows 95/98 and
if the included 32-Bit Print Spooler software has been installed.
When selected, this option allows the printer driver to send all
print jobs to QuatroÕs 32-Bit Print Spooler rather than to the
Quatro/510323 v3 1/8/99 10:48 AM Page 21