FARGO electronic Quatro ID Card Printer User Manual
Page 38
34 Maintenance
5.
Reach down and grasp the end of the Cleaning Roller
Assembly which is closest to the front of the printer. Lift
this end first, and gently maneuver the assembly out of the
printer.
6.
Once the Cleaning Roller Assembly is removed, clean the
rollers using one of the adhesive-backed Cleaning Cards
from the Printer Cleaning Kit. With the cardÕs adhesive
backing paper removed, slide the card between the rollers
until all dust particles are removed. If you do not have a
Cleaning Card, use a piece of standard clear adhesive tape.
Use the sticky side of the tape to lift dust from the rollers.
7.
Once all debris is removed from the rollers, place the roller
assembly back into the printer, replace the ribbon, and
close the printerÕs Printhead Assembly and Top Cover.
Quatro/510323 v3 1/8/99 10:48 AM Page 34