Fostex D-108 - Manual (Page 10)

D-108 Owner's Manual (Names and Functions)
10
Auto Repeat mode:
This mode is a combination of Auto Play and Auto Return,
and plays backthe part between the START and END
points repeatedly. The auto repeat function is effective
only when the START and END points have been specified
correctly.
* Refer to page "60" for details.
13. Clipboard In key [CLIPBOARD IN]
This key is used to store and recall the In point (CLIPBOARD
IN point) for the Copy or Move operation. You can locate
a stored CLIPBOARD IN point.
If you press the CLIPBOARD IN key while holding down
the RECALL key when the recorder is stopped, you can
preview the fade-in part at the stored CLIPBOARD IN point.
* Refer to page “67” for copying/moving data.
* Refer to page "60" for locating the CLIPBOARD IN point.
* Refer to page "65" for previewing data at the CLIPBOARD IN
point.
14. Clipboard Out key [CLIPBOARD OUT]
This key is used to store and recall the Out point
(CLIPBOARD OUT point) for the Copy or Move operation.
You can locate a stored CLIPBOARD OUT point.
If you press the CLIPBOARD OUT key while holding down
the RECALL key when the recorder is stopped, you can
preview the fade-out part at the stored CLIPBOARD OUT
point.
* Refer to page "60" for locating the CLIPBOARD OUT point.
* Refer to page "67" for copying/moving data.
* Refer to page "65" for previewing data at the CLIPBOARD
OUT point.
15. Auto Return Start key [AUTO RTN START]
This key is used to store and recall the start point (AUTO
RTN START point) for the Auto Return or Auto Repeat
operation. You can locate a stored AUTO RTN START
point.
If you press the AUTO RTN START key while holding down
the RECALL key when the recorder is stopped, you can
preview the fade-in part at the stored AUTO RTN START
point.
16. Auto Return End key [AUTO RTN END]
This key is used to store and recall the end point (AUTO
RTN END point) for the Auto Return or Auto Repeat
operation. You can locate a stored AUTO RTN END point.
If you press the AUTO RTN END key while holding down
the RECALL key when the recorder is stopped, you can
preview the fade-out part at the stored AUTO RTN END
point.
17. Auto Punch In key [AUTO PUNCH IN]
This key is used to store and recall the recording start
point (AUTO PUNCH IN point) for the Auto Punch IN/
OUT operation. This point is also used as an erase point.
You can locate a stored AUTO PUNCH IN point.
If you press the AUTO PUNCH IN key while holding down
the RECALL key when the recorder is stopped, you can
preview the fade-out part at the stored AUTO PUNCH IN
point.
* Refer to page "39" for more information about Auto Punch In/
Out recording.
* Refer to page "67" for more information about pasting data.
* Refer to page "70" for more information about the Erase
operations.
* Refer to page "65" for previewing data at the AUTO PUNCH
IN point.
18. Auto Punch Out key [AUTO PUNCH OUT]
This key is used to store and recall the recording end
point (AUTO PUNCH OUT point) for the Auto Punch IN/
OUT operation. This point is also used as an erase point.
You can locate a stored AUTO PUNCH OUT point.
If you press the AUTO PUNCH OUT key while holding
down the RECALL key when the recorder is stopped, you
can preview the fade-in part at the stored AUTO PUNCH
OUT point.
* Refer to page "39" for more information about Auto Punch In/
Out recording.
* Refer to page "70" for more information about the Erase
operation.
* Refer to page "65" for previewing data at the AUTO PUNCH
OUT point.
Memory keys (CLIPBOARD IN, CLIPBOARD OUT, AUTO
RTN START, AUTO PUNCH IN, AUTO PUNCH OUT, and
AUTO RTN END keys) have the following common
functions:
* Refer to page "60" for locating the AUTO RTN START point.
* Refer to page "67" for copying/moving data.
* Refer to page "65" for previewing data at the AUTO RTN
START point.
* Refer to page "60" for locating the AUTO RTN END point.
* Refer to page "67" for copying/moving data.
* Refer to page "65" for previewing data at the AUTO RTN
END point.