Fostex D-108 - Manual (Page 52)

52
D-108 Owner’s Manual (Recording to a Metronome Sound)
Recording to a Metronome Sound
This chapter explains how to record your performance while you are playing an instrument accompanied by
a metronome based on the time signature and tempo specified in the Tempo Map. The metronome sound is
output from track 8.
• Initialize the D-108 before the operation.
• If multiple Programs exist, first select the desired Program.
<Notes>
* When you finish using the Metronome function, turn the function off in SETUP mode.
* When the Metronome function is on, you cannot record data on track 8, or you cannot play data recorded on track 8.
AC IN MIDI SCSI
OUTPUT INPUT
DATA OPTICAL
OUTPUT INPUT
BUSS OUT (GROUP OUT) 1~8 TAPE IN 1~8
D-108
Mixing console
Creating a Tempo Map
* Set the time signature using the “Setting a time
signature” menu in SETUP mode.
Refer to the “Setting a time signature” section on page
108.
* Set a tempo for a given point using the “Setting a
tempo” in SETUP mode.
Refer to the “Setting a tempo” section on page 109.
Turning the Metronome function on
* Turn the Metronome function on using the “Setting
the Metronome function” menu in SETUP mode.
Refer to the “Setting the Metronome function” section
onpage 111.
Musical Instrument