Executing track exchange, D-108 owner’s manual (editing tracks), When [1-8] is flashing, turn the jog dial – Fostex D-108 User Manual
Page 74: Press the execute/yes key, With the jog dial, choose “[track exchange?]” menu, Swapping mono track data between any two tracks, Flashing
D-108 Owner’s Manual (Editing Tracks)
74
4. Select the tracks to swap data.
1. Press the HOLD/> key or turn the SHUTTLE dial
to move the flashing [1-8] (left) indication to the
flashing [9-16] (right) indication.
2. Turn the JOG dial to change flashing [9-16] to
flashing [17-24].
• Swapping mono track data between any two tracks
1. When [1-8] is flashing, turn the JOG dial.
Turning the JOG dial allows you to select a mono
track from [1], [2], [3], [4]........ [24] in the left column.
The right column continues a mono track.
For example, if you select [4] in the left column, the
display indicates [4<>1], meaning you can swap data
between tracks 4 and 1.
4. Press the EXECUTE/YES key.
[Exchange] lights up and the swapping operation is
completed immediately.
The D-108 indicates [COMPLETED !], then returns to the
previous Time Base display.
Note:
If you select the same tracks for swapping mono
track data, the setting is ignored. The D-108 will indicate
[Select Err] for a short moment, then return to the previous
display.
* You cannot play data or check the REC END point on the
Additional tracks. To do so, you need to move the data to a
Real track.
If you load back-up data from the external DAT recorder,
adat machine, or backup SCSI drive, the data maintains the
same condition as when you previously saved it to DAT,
adat, or backup SCSI drive.
Flashing
Flashing
Flashing
Flashing
Executing Track Exchange
1. While the D-108 is stopped, press the DISP SEL key
to go to the SETUP menu, then press the EXECUTE/
YES key to go to the SETUP mode.
The [Drive Sel. ?] menu will appear in the default status.
2. With the JOG dial, choose “[Track Exchange?]”
menu.
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
3. Press the EXECUTE/YES key.
The display shows the track selection.
The current display shows that you can swap eight-track
data between Real tracks 1-8 and Additional tracks 9-16.
If you wish to select other tracks, follow the step below.
• Selecting Real tracks 1-8 and Additional tracks 17-24:
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
Flashing
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
2. To select a number on the right, press the
HOLD/> key or turn the SHUTTLE dial as done
for the left, to move the flashing point. Then
use the JOG dial to select a specific track
number.
* When you swap data between mono tracks, the
indications [Trk=04<->Trk=01] and [Trk=01<->Trk=04],
for example, mean the same thing — swapping data
between tracks 1 and 4.