Editing a program title, D-108 owner’s manual (handling programs), Press the execute/yes key – Fostex D-108 User Manual
Page 38
38
D-108 Owner’s Manual (Handling Programs)
Editing a Program title
You can name the Program as explained in the “Creating a new Program” section. You can also change the title
later by using the [Title Edit ?] menu in SETUP mode.
3. Press the EXECUTE/YES key.
The currently-selected Program title appears with the left-
most character flashing.
4. Move the flashing cursor with the HOLD/> key or
SHUTTLE dial. Use the JOG dial to input the
character or number desired. The title can contain
up to 16 alphanumerics.
You can enter up to 16 characters, nine of which will
appear on the display.
You may enter the following characters and numbers:
5. After you enter the title, press the EXECUTE/YES
key.
The new title is confirmed, and the ABS time value of the
Program appears.
Note:
You can edit the title of the selected Program before you select SETUP mode. You cannot select a
Program after the D-108 enters SETUP mode. Be sure to select the desired Program using the steps explained
in the “Using the Program Change function” section.
1. Press the DISP SEL key while the D-108 is stopped,
to put the system in the SETUP mode, then press the
EXECUTE/YES key.
The D-108 enters SETUP mode, and displays the first
hierarchy of the SETUP menu that was displayed before you
turned off the power. The default setting is [Drive sel. ?]
menu (setting a current drive).
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
2. Turn the JOG dial to select the first hierarchy level
of the [Title Edit ?] ([?] flash.) menu.
The HOLD/> key can be used in addition to the JOG dial
to select the indication.
The following example assumes that the title of Program
that can be edited is Program 2.
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
44.1kHz
SETUP
8
7
6
5
4
3
2
1
42
OL
0
30
24
18
12
9
6
3
∞
6. Press the EXIT/NO key, or the STOP button.
<Check the title input>
To check the title that was newly input, press the DISP SEL
key and then switch to the SETUP mode.
The newly input title will appear when the SETUP mode ap-
pears. After confirming the title, press the DISP SEL key to
switch back to the top of the previous Program indication.